LAN Distance Windows Remote Workstation (LD11WIN.TXT)
-----------------------------------------------------

Please see LD11PAT.TXT for information on the fixes provided by this
ZIP file. Install all fixes in LD11WIN.ZIP to the remote due to
dependencies between modules. Check LD11PAT.TXT to determine if a
fix for a particular problem that you are having requires a fix to
the LAN Distance connection server.

Note: These fixes must be applied after either IP07050 or LD 1.11.

Disclaimer: This package contains fixes/enhancements that
have been tested; however, testing was not as extensive as
testing for an official CSD. Make sure that all updated
files are backed up as stated in the instructions for
installing the fix modules.


Installation steps for English versions of LAN Distance:
--------------------------------------------------------

Note:  See below for installation steps for other language versions.

    (1) You should have the following new files:
	       ASYNCLL.PIF
	       NODIALOG.DDF
	       WINAMAC.SYS
	       LDVCD.386
	       WCBLOGON.EXE  <--- Only for English versions of LD
	       WCLSC1RC.DLL  <--- Only for English versions of LD
	       LD11WIN.TXT   <--- The file you are reading now

    (2) Rename

	 x:\WAL\ASYNCLL.PIF to ASYNCLL.OLD
	 x:\WAL\NODIALOG.DDF to NODIALOG.OLD
	 x:\WAL\WINAMAC.SYS to WINAMAC.OLD
	 x:\WAL\LDVCD.386 to LDVCD.OLD
	 x:\WAL\WCBLOGON.EXE to WCBLOGON.OLD


    (3) Unzip LD11WIN.ZIP to x:\TEMP subdirectory

    (4) Copy the files from x:\TEMP subdirectory into the
	x:\WAL directory

    (5) Re-start the workstation.

Installation steps for language versions other than English:
------------------------------------------------------------

    (1) You should have the following new files:
	       ASYNCLL.PIF
	       NODIALOG.DDF
	       WINAMAC.SYS
	       LDVCD.386
	       LD11WIN.TXT   <--- The file you are reading now

    (2) Rename

	 x:\WAL\ASYNCLL.PIF to ASYNCLL.OLD
	 x:\WAL\NODIALOG.DDF to NODIALOG.OLD
	 x:\WAL\WINAMAC.SYS to WINAMAC.OLD
	 x:\WAL\LDVCD.386 to LDVCD.OLD

    (3) Unzip LD11WIN.ZIP to x:\TEMP subdirectory

    (4) Copy the files from x:\TEMP subdirectory into the
	x:\WAL directory

    (5) Re-start the workstation.

