TITLE:		HP JetDirect with Corstream, LANtastic Dedicated Server

UPDATED:		10.30.95	

AUTHOR:		RH		

This bulletin presents technical information about one topic related to your LANtastic network.  Bulletins are available to help you with many aspects of managing or enhancing your network and with the installation of many compatible products. Bulletins are available:

( By fax from the Artisoft FaxReturn System at (520) 884-1397; request document 2 for a current list of all available bulletins, document 2001 for a list of compatible applications and other software, document 2044 for a list of compatible network interface cards and other hardware;

( Through the Artisoft Home Page http://www.artisoft.com on the World Wide Web;

( As ASCII text or Acrobat Text Enriched (PDF) files from the Artisoft Arti-Facts BBS at (520) 884-8648 (1200 baud - 28.8 Kbps, 8 data bits, 1 stop bit, no parity, full duplex), the GO ARTISOFT forum on CompuServe, or the Artisoft anonymous FTP site ftp.artisoft.com; download !BLTXREF.TXT from the BULLETIN section for a current list of all available bulletins, APPCOM.TXT for a list of compatible applications and other software, NICCOM.TXT for a list of compatible network interface cards and other hardware.



To setup the HP JetDirect printer with LANtastic Dedicated Server, you can follow one of two routes for setup.



1)  Did you INSTALL LANtastic Dedicated Server from CD-ROM?



By installing from CD-ROM, this ensures that PCONSOLE.EXE [NetWare printer console 

program] is correctly installed onto the LANtastic Dedicated SERVER.  PCONSOLE.EXE is 

required for setting up the HP JetDirect in `remote printer' mode.  Most other network style 

printers use PCONSOLE.EXE as part of their setup routine as well.



When using this method, the points that will need to be covered during the setup of the HP 

JetDirect are:



  INSTALL LANtastic Dedicated Server from CD-ROM

  Create VLM client workstation boot disk

  Login as VLM client user ADMIN from any LANtastic workstation

  Run the HP JetDirect setup routine JetAdmin [per the manufacturers instructions]

  Create the LANtastic Dedicated Server SPOOLDEV file

  Create shared resource in LANtastic NET_MGR



INSTALL LANtastic Dedicated Server from CD-ROM



Follow the installation instructions for installing the LANtastic Dedicated Server software 

from CD-ROM, as indicated on Pg. 11 of the LANtastic Dedicated Server Installation Guide.



Create VLM client workstation



Download LANDSVLM.EXE, a self extracting file that contains the necessary VLM client files. 

 

Extract the files to a high-density BOOTABLE blank formatted floppy diskette.



To perform the extraction, download and place the LANDSVLM.EXE file into a temporary subdirectory on any machines hard drive [\TEMP\ for example]. Once there, place the floppy diskette to where you are going to place the VLM boot files into drive A:\.  Change your DOS prompt to A:\, then type:



				C:\TEMP\LANDSVLM



		This will extract the files onto the floppy diskette automatically.





Login as VLM client from any LANtastic workstation



Take the newly created VLM client diskette to a LANtastic workstation, that has any one of the following adapters installed in it:

 

Artisoft Noderunner

Artisoft AEx series adapter

Eagle NE2000 adapter

Generic NE2000 compatible

3Com 3c509 adapter

Intel Etherexpress

Other ODI driver that is manually entered

 

Boot the LANtastic workstation machine from the VLM client diskette that you created in the above step.



Run A:\SETUP.BAT to begin the VLM boot sequence.



SETUP will prompt you for the card that you are using, select the appropriate ODI driver using the table below as a reference.



Card brand / type				ODI driver name

Artisoft Noderunner 				NRODI.COM

Artisoft AE2/3 series adapter		NE2000.COM

Artisoft AE1/t adapter				No ODI driver available

Generic NE2000 clone			NE2000.COM

Eagle NE2000 adapter			NE2000.COM

3Com 3c509 adapter				3C5X9.COM located on 3Com drivers diskette.

Other non listed adapter			OTHER





Once you have selected the appropriate ODI driver, SETUP will prompt you for the administrators username, ADMIN is the default and should suffice for most if not all installations.  Press ENTER to accept ADMIN as the username



SETUP will load the VLM drivers, and login to the LANtastic Dedicated Server as ADMIN.  SETUP will prompt you to enter the password for ADMIN.  Simply type in the password and press ENTER.



You should now be sitting at an F: DOS prompt, which indicates that you are correctly logged into the LANtastic Dedicated Server as a VLM client.



Run the HP JetDirect setup routine [per the manufacturer's instructions]



Depending on the version of HP JetAdmin that you are using, the steps to follow would be:



At the newly created VLM workstation, insert the HP JetDirect NOVELL NetWare administration and printing utilities diskette #1 into the floppy disk drive.



Run A:\INSTALL which will invoke the HP JetDirect extraction utility.



Select ENGLISH as the language of choice for HP JetDirect install to use.



When JetDirect install asks you where you want to place the JetAdmin files, inform the install 

program to place them in the \PUBLIC\ directory of your Artisoft LANtastic Dedicated Server [should be drive F:].



JetDirect install will extract the files, then place you back at a DOS prompt.



Run PCONSOLE to setup print queues



Now that the software has been extracted, make sure that you are in the F:\PUBLIC directory, type PCONSOLE to invoke the NetWare printer console utility program.



From the main menu of PCONSOLE, select Quick Setup and press ENTER.



Supply a name for both the printer and queue names. The print server field will already have an entry in it and should not need to be altered.  For example, let's suppose that you wanted to use the following names for print queue and printer name:



			Print Queue name:		HPEX

			Printer name:			Crimson

			Print SERVER name:		PS-[server-name]



The particular name is not important; just remember to keep it simple and to the point.  Also, the print SERVER name will be based on the name of your CorStream / LANtastic Dedicated SERVER. If your SERVER name was JUMBO, then the print SERVER name would be:  PS-JUMBO.



Change the printer type to OTHER/UNKNOWN



Press F10 to save changes and exit back to main menu.



From the main menu of PCONSOLE, select Print Queues [press Enter], highlight and press Enter on the print queue that you just created [HPEX for example].  Then select OPERATORS from the available options list.  Press the INSERT key and select LANtastic from the available list of users [press Enter].



Press the escape key [ESC], until you have exited out of PCONSOLE back to a DOS prompt.



Running the HP JetAdmin program



NOTE:  The HP JetAdmin program can be navigated via the keyboard using a combination of the TAB and ARROW keys.  For more information on using the keyboard, refer to the HP JetDirect users manual.  Make sure that you are in the F:\PUBLIC directory.



Type JETADMIN press ENTER.



Highlight the appropriate JetDirect adapter, then select Management from the menu, followed by selecting configuration [press Enter].



Type in the appropriate queue, print server, and printer name in the given dialog boxes.  Thus, for our example, you would use:

		Print SERVER:		PS-JUMBO

		Printer name:		CRIMSON

		Print Queue name:	HPEX



Save your changes and test the setup by sending a test page.



NOTE:  If the CorStream / LANtastic Dedicated Server is already running PSERVER.NLM 

[NetWare 386 print SERVER], then you will need to down , exit and reboot the CorStream / 

LANtastic Dedicated Server before attempting to send a test page.



Exit JetAdmin.



Create the LANtastic Dedicated Server SPOOLDEV file



Once the NetWare printer queues and servers have been created, create the LANtastic SPOOLDEV file as instructed on Pg. 107 of the LANtastic Dedicated Server User's manual.  

 

Create shared resource in LANtastic NET_MGR



Run NET_MGR.EXE on any LANtastic DOS SERVER, select control directory maintenance, and change the control directory location so that you are modifying the control directory on the LANtastic Dedicated SERVER.

 

Create a shared resource that points to the printer port that you created in the SPOOLDEV file in the above section.

 

This concludes the setup of the HP JetDirect for use with LANtastic Dedicated Server.



2)  Did you INSTALL CorStream / LANtastic Dedicated Server from floppy disk?



By installing from floppy diskette instead of CD-ROM , the following NetWare file areas are missing from the installation:



NetWare			NetWare utility files that are missing

CorStream			No important files missing

LANtastic Dedicated Server 	No \LOGIN\ directory.

				No VLM client files that allow for login as NetWare client.

				No PCONSOLE.EXE program





The points that will need to be covered during the setup of the HP JetDirect are:



  INSTALL LANtastic Dedicated Server from floppy diskette

  Create VLM client workstation

  Login as VLM client from workstation

  Run the HP JetDirect setup routine [per the manufacturer's instructions]

  Create the LANtastic Dedicated Server SPOOLDEV file

  Create shared resource in LANtastic NET_MGR.EXE



INSTALL LANtastic Dedicated Server from floppy diskette



Follow the installation instructions for installing the LANtastic Dedicated Server software 

from floppy diskette, as indicated on Pg. 22 of the LANtastic Dedicated Server Installation Guide.



Extract the HP JetDirect setup routine [per the manufacturer's instructions]



Depending on the version of HP JetAdmin that you are using, the steps to follow would be:



While sitting at ANY LANtastic workstation, redirect a disk drive to the C-DRIVE resource on the CorStream or LANtastic Dedicated Server, insert the HP JetDirect NOVELL NetWare administration and printing utilities diskette #1 into the floppy disk drive.



Run A:\INSTALL which will invoke the HP JetDirect extraction utility.



Select ENGLISH as the language of choice for HP JetDirect install to use.



When JetDirect install asks you where you want to place the JetAdmin files, inform the install 

program to place them in the \PUBLIC\ directory of your Artisoft LANtastic Dedicated Server [should be drive F:].



JetDirect install will extract the files, then place you back at a DOS prompt.



Create VLM client workstation



Download the VLM client and support files (LANDSVLM.EXE).

NOTE: If installing LANtastic Dedicated Server v1.1 [instead of CorStream v1.0] from floppy you must also download LANDSPRN.EXE.

 

Take the newly created BOOTABLE floppy diskette to a machine on the network that has 

one of the following adapters:



NRODI.COM			Artisoft Noderunner adapter

NE2000			Artisoft AEx adapter; Eagle NE2000 adapter; NE2000 clone

NE3200			Microdyne or Intel NE3200 bus mastering adapter

3C509				3Com 3c509 ODI driver

EXP16ODI			Intel Etherexpress ODI driver

Enter Driver by hand	Use this selection to specify your own ODI driver



Extract LANDSPRN.EXE to the ROOT directory of the C: hard drive of the LANtastic 

workstation.



Boot the machine from the BOOTABLE floppy diskette that you extracted LANDSVLM onto.



Run SETUP.BAT from the root directory of the diskette.



Select your network adapter from the list, refer to the table below:



NRODI.COM		Artisoft Noderunner adapter

NE2000		Artisoft AEx adapter; Eagle NE2000 adapter; NE2000 clone

NE3200 		Microdyne or Intel NE3200 bus mastering adapter

3C509			3Com 3c509 ODI driver

EXP16ODI		Intel Etherexpress ODI driver

Enter Driver by hand	Use this selection to specify your own ODI driver



Once the adapter has been selected, SETUP will ask for the port address and possibly the 

irq of the network adapter.  Enter these values followed by pressing ENTER.



SETUP will now ask for the name of the LANtastic Dedicated Server or CorStream 

SERVER. Type this information in and press ENTER.

 

Login as VLM client from workstation

 

Leave login name as ADMIN.  Press ENTER.

You are now logged into the SERVER as the NetWare user ADMIN. 



Run PCONSOLE to setup print queues



Now that the software has been extracted, make sure that you are in the F:\PUBLIC directory. Type PCONSOLE to invoke the NetWare printer console utility program.



From the main menu of PCONSOLE, select Quick Setup and press ENTER.



Supply a name for both the printer and queue names. The print server field will already have an entry in it and should not need to be altered.  For example, lets suppose that you wanted to use the following names for print queue and printer name:



			Print Queue name:		HPEX

			Printer name:			Crimson

			Print SERVER name:		PS-[server-name]



NOTE:  If using CorStream v1.0 the printer queue name must be one of the following:



PORT TO REDIRECT			PRINT QUEUE NAME

LPT1						LPT1_Q

LPT2						LPT2_Q

LPT3						LPT3_Q

COM1						COM1_Q

COM2						COM2_Q

COM3						COM3_Q

COM4						COM4_Q



As you may notice, with CorStream v1.0 it is imperative that the name of the queue match the name of the port that you wish to redirect to the HP JetDirect.





Change the printer type to OTHER/UNKNOWN



Press F10 to save changes and exit back to main menu.



From the main menu of PCONSOLE, select Print Queues [press Enter], highlight and press Enter on the print queue that you just created [HPEX for example].  Then select OPERATORS from the available options list.  Press the INSERT key and select LANtastic from the available list of users [press Enter].



Press the escape key [ESC], until you have exited out of PCONSOLE back to a DOS prompt.



Running the HP JetAdmin program



NOTE:  The HP JetAdmin program can be navigated via the keyboard using a combination of the TAB and ARROW keys.  For more information on using the keyboard, refer to the HP JetDirect users manual.



Make sure that you are in the F:\PUBLIC directory



Type JETADMIN press ENTER.



Highlight the appropriate JetDirect adapter, then select Management from the menu, followed by  selecting configuration [press Enter].



Type in the appropriate queue, print server, and printer name in the given dialog boxes. For 

our example, you would use:



		Print SERVER:		PS-JUMBO

		Printer name:		CRIMSON

		Print Queue name:	HPEX



Save your changes and test the setup by sending a test page.



NOTE:  If the CorStream / LANtastic Dedicated Server is already running PSERVER.NLM 

[NetWare 386 print SERVER], then you will need to down, exit and reboot the CorStream / 

LANtastic Dedicated Server before attempting to send a test page.



Exit JetAdmin.



Create the LANtastic Dedicated Server SPOOLDEV file



NOTE:  This step only applies if you are using LANtastic Dedicated Server V1.1.  If you are using CorStream V1.0, skip creating a SPOOLDEV file.



Once the NetWare printer queues and servers have been created, create the LANtastic SPOOLDEV file as instructed on Pg. 107 of the LANtastic Dedicated Server User's manual.  

 

Create shared resource in LANtastic NET_MGR



Run NET_MGR.EXE on any LANtastic DOS SERVER, select control directory maintenance, and change the control directory location so that you are modifying the control directory on the LANtastic Dedicated SERVER.

 

Create a shared resource that points to the printer port that you created in the SPOOLDEV file in the above section.



NOTE:  If you are using CorStream v1.0, the printer port should point to the name of the queue that you created.  Refer to the table below for reference:



Print queue name			Port in NET_MGR.EXE 

LPT1_Q				LPT1

LPT2_Q				LPT2

LPT3_Q				LPT3

COM1_Q				COM1

COM2_Q				COM2

COM3_Q				COM3

COM4_Q				COM4



This concludes the setup of the HP JetDirect for use with LANtastic Dedicated SERVER / CorStream.



ARTISOFT TECHNICAL SUPPORT:

Artisoft offers a wide selection of technical support options. For information regarding technical support services, please refer to our Directory of Support Services, available where you obtained this bulletin (request fax document 4, check Support & Services at our Home Page, or download file DIRLIST.TXT).  You can also obtain this information by calling Artisoft at (520) 670-7000.

Artisoft makes no warranties as to the completeness or accuracy of this document.  Artisoft is not responsible for lost profit or revenue, loss of software use, loss of data, cost of re-creating data, cost of any substitute equipment or program, or any other claim.  Artisoft makes no warranty that complying products will operate under any other conditions, or that products will satisfy requirements, or that products will be without defect or error, or that product operation will be uninterrupted.  Artisoft's aggregate liability is limited to the total of payments made by the customer for the Artisoft product and Artisoft shall not in any case be liable for any special, incidental, consequential, indirect, or punitive damages, even if it has been advised of the possibility of those damages.  LANtastic is a trademark of Artisoft, Inc.  Brand names, company names, and product names are trademarks or registered trademarks of their respective companies.



	LANtastic Technical Bulletin	Page 10 of 10

Artisoft Inc.

Sales: Phone 800-846-9728 Fax: 520-870-7359

2202 Forbes Blvd

Technical Support: Phone 520-670-7000

Tucson, Arizona 85745






LANtastic(	Artisoft(

Powerfully simple networking.(	Technical Bulletin



[DSJET]	Technical Bulletin	Page 1 of 10
Artisoft, Inc.	Sales Consultation Center:  (800) 846-9726  FAX (520) 670-7359
2202 N. Forbes Boulevard	Product Certification Message Center:  (520) 670-7107  FAX (520) 670-7225
Tucson, Arizona  85745-1412	Information regarding Technical Support:  (520) 670-7000  BBS (520) 884-8648





