               ||||||||||||||||||||||||
               |                   tm |   ComputerEase 
               |  C h r o n o L o g   |   7204 John Elizabeth Place
               |                      |   Prince George, VA 23875
               ||||||||||||||||||||||||     
     
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                   QUICK INSTALLATION INSTRUCTIONS
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
     
If you are installing from the ChronoLog "master" diskette(s), one 3 1/2" 
or two 5 1/4" floppy(s), the files are not compressed.  Use the 
following procedure to install:

      - There should be at least 15 files.  See the file PACKING.LST 
        for a listing of the minimum files required.

      - Insert the 3 1/2" floppy or 5 1/4" floppy #1 (contains the 
        file CLINST.EXE) into a floppy drive.

      - Type CLINST (the ChronoLog System Installation Program).  This will 
        create a subdirectory on your hard drive and copy the system files 
        into it.  (If loading from 5 1/4" floppy, you will be prompted to 
        insert floppy #2.).  CLINIT (the ChronoLog Database Initialization 
        Program) will execute automatically.
 
      - Type CHRONO to execute ChronoLog.


If you have the ChronoLog files compressed into a single file (the 
file name should be CHRON100.xxx, where xxx = compression extension), 
use the following installation procedure:

      - You do not need to run CLINST.  Instead make sure that the 
        compressed file has been copied to the subdirectory on your
        hard drive wherein you want the ChronoLog system files to reside.

      - Uncompress CHRON100.xxx.  If the uncompress is successful, 
        you may delete CHRON100.xxx.

      - There should be at least 15 files when uncompressed.  See the 
        file PACKING.LST for a listing of the minimum files required.
     
      - Type CLINIT (the ChronoLog Database Initialization Program) to 
        initialize a database in the subdirectory where the system files 
        reside.

      - Type CHRONO to execute ChronoLog.

