ONSMAP.DXF (drawing exchange format) & ONSMAP.WPG (Wordperfect
graphics format)

This is a sectional map (drawing) of Southern Ontario showing the
Airports, Navaids and ILS in Alfred Grech's CAN-CEN3 southern Ontario
part of the scenery. It shows Southern Ontario Navaids in WORLD3.BGL
and Rochester and Buffalo NY VORs are included. Lake outlines are shown.
The map is similar in appearance to the maps in the FS5 manual.

The drawing was created in Generic CADD 6.0,

Printing suggestions

The drawing was designed to, and will give acceptable
resolution/legibility when printed on 17" by 11" paper at 600
dpi, (cut to 17" by 8.5" to fit the printer if necessary, the
width/height ratio of the image is 2.15, so you won't lose
anything). Printing to 14" by 8.5" should also be OK. The drawing
can be printed at lower resolution but may need to be printed to
a larger area to be legible. If you can't print to longer than
11", and you have CAD software, then you can save the drawing in
two halves (an East and West half), print separately to 11" by
8.5" to the same scale and glue the two together. I've printed to
an Epson dot matrix 8 pin on 2 sheets of 8.5" by 11" and the text
is legible except for some of the numbers.

The .WPG file has been successfully printed in Wordperfect.
Hopefully others can convert the file(s) to other formats to make
them more widely available.

No commercial use of these files is permitted.

Andy Meysner January 20, 1995
