     Use  POPPRINT  in  DOS to fax any non-ASCII  file.  You  run
FAXMAN  then  POPPRINT.

C:\MTEZ>faxman
C:\MTEZ>popprint

You  do NOT run MTEZ. From your DOS application (Wordperfect  for
example),  You set up a Printer Driver ( ** Epson FX85,  RX80  or
FX80  ** ). Then you press the 2  <shift> keys which will give  a
'beep'. Then PRINT the file from THAT application as you normally
would,  except  using the FX/RX printer driver in place  of  your
usual  driver.  POPPRINT will capture the output, and  when  done
converting, present a window, ready to fax.

     If  the  window does not appear, the TEMP directory  in  SET
TEMP= or SET TMP= in Autoexec.bat may not exist. Also may be  TSR
problem.   If you get garbage, you have the wrong Printer  Driver
in Word Perfect.

     One thing you must also remember, Popprint cannot fax  fonts
built-into  your  printer.  Only  fonts  actually  sent  TO  your
printer, or built into MTEZ.

     Popprint uses conventional memory only. If you are not going
to  be  using Popprint you may want to remove it, and  reload  it
only as needed.

C:\MTEZ>popprint /r


                                   Don Hinds - Zoom Tech
##include=c:\text\signa.tif

