             NO DIALTONE / or w/X0/X1/X3 NO CARRIER

     Generally  if the software says NO DIALTONE but you  hear  a
dialtone  through the speaker, the modem needs fixing. If you  do
not  hear a dialtone, plug a phone into the 'phone' jack  of  the
modem to see if the dialtone is getting to the modem. If you hear
dialtone  on the phone, AND it is a 1-LINE phone line, the  modem
needs fixing. If you have a phone with buttons for more than  one
line,  then you have the wrong line for the modem. It MUST  be  a
single-phone phone line. The 2 'live' wires must be on the inside
two  wires in the phone plug.

      Often  in  parts  of Europe you need to use X0,  X1  or  X3
because  the  modem does not recognise the Dialtone (so  says  NO
DIALTONE). This goes in the dial prefix ie; ATX3DT   This  allows
the  modem to dial without 'hearing' dialtone. It also will  dial
if  there  IS  NO DIALTONE, because of a  wrong  adapter  or  bad
connector. Then you will get NO CARRIER after a pause. Check your
adapters and connections.

     for repair: Customer Service  617-423-1072


                                   Don Hinds - Zoom Tech
##include=c:\text\signa.tif
