2-23-95
              Use of PcAnywhere, CloseUp, PkCarbon Copy etc.
                  with V series Modems and v32 RPI modems

     In  the  modem  setup where you have a choice of  modems.  Pick  Hayes 
(smartmodem) 2400 or Hayes 2400 compatible. Set your speed (19,200 is best, 
38,400  for  28K modems) and RTS/CTS flow control. Set the software  to  
NOT follow connect speed (autobaud OFF), but be at locked (fixed)  at  the 
DTE (modem-computer) speed that you set in the software. If you are calling 
non  'V'  modems,  and have trouble connecting, then  try  putting  &Q6  in 
additional  inititialization  string.  (AT&Q6 followed  by  the  software's 
carraige  return  character(s),  some use  \   some use ^M   some  may  use 
something else). If you can't use RTS/CTS flow, you probably want  XON/XOFF 
which  is  &K4  or  &K5 (see the manual for the  difference).  If  you  use 
XON/XOFF then set true modem speed & use &Q0. Also check CONFIG.SYS to see 
that BUFFERS=40 or higher. Try REM out SHARE statement as well.

     Hayes  V  series modems have some proprietary commands (non  -  CCITT)
which will cause an error used with a Zoom V series modem.

     It  is  recommended that you use a non-existent COMport (3 or  4),  or
REMOVE serial 2 rather than just disabling serial 2.     One other hint may
be felpful, if you have trouble at 14,400bps. Put this string in User...

ATS37=9N0  (w/carraige return) which tells the modem to conect at 9600.

>>>  If an older 2400 modem works, but the V-series modem does not, you may
need to change the serial cable. It must support Hardware flow control.

     Symantic BBS 9600 - 503-484-6699     new models NEWMOD.EXE
              BBS 2400 - 503-484-6669

                                   Don Hinds - Zoom Tech
##include=c:\text\signa.tif
