3-1-95                         Using AT&F

     All  initialization strings should start with AT&F... to  'clear'  the

modem  before  you start. This removes anything another software  may  have

done. On very rare occasions during the log-off process, something can  get

set  in the modem The AT&F will clear this too. Never use ATZ unless  there

is  no   other  choice as that only resets to saved  profile,  not  factory

settings. The usual PC init or reset string would be AT&F&C1&D2

     If the modem gets 'stuck' from conflicting inits, an AT&F&W (Clear and

Save) should set things right again. If you get a response +Fxxx that is  a

FAX  response, not DATA. To reset to DATA after using a FAX  software  like

Winfax, AT&F+FCLASS=0     (add &W to save). Hangup is ATH or ATH0

     While  you can save the string ..   AT&F&C1&D2&W   , it is  better  to

put  the  string in your software. If the place to put the  string  is  not

obvious, call the Mfr of the software for help.

                                   Don Hinds - Zoom Tech
##include=c:\text\signa.tif
