                DISCLAIMER - AGREEMENT

USERS OF ACCESSES MUST ACCEPT THIS DISCLAIMER OF WARRANTY:

"ACCESSES IS SUPPLIED 'AS IS'. THE AUTHOR DISCLAIMS ALL 
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT 
LIMITATION,THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR 
ANY PURPOSE. THE AUTHOR ASSUMES NO LIABILITY FOR DAMAGES, DIRECT 
OR CONSEQUENTIAL, WHICH MAY RESULT FROM THE USE OF ACCESSES. IN 
ANY CASE THE MAXIMUM LIABILITY OF THE SELLER WILL BE LIMITED 
EXCLUSIVELY TO PRODUCT REPLACEMENT OR REFUND OF PURCHASE PRICE."

The ACCESS.ZIP file contains the following program files:

        ACCESSES.EXE        The main program. The normal version
                            152976 bytes in size whereas the
                            dragdrop version is 153616 bytes.
        ACCESSES.HLP        The help file in Windows
                            HELP format.
        README.TXT          This file.
        VENDOR.TXT          Shareware and Vendor info.
        REGISTER.FRM        Registration Information.
        ARCHIVES.TXT        required reading for Archives
                            users.
        NORTON.TXT          An important note to Norton Desktop
                            users and a caution about Accesses
                            Version 1.0 incompatibility with
                            Norton Desktop.
        CHANGES.TXT         Required reading for previous
                            Accesses version users.

You MUST Place ACCESSES.EXE and ACCESSES.HLP in the same 
directory as the TASKMAN.EXE windows program. You must have 
ACCESSES.HLP installed for the installation to work properly.

Accesses creates ACCESSES.INI when Accesses is 1st started if an 
ACCESSES.INI doesn't already exist.  Accesses updates older version
INI files with the new info when each newer version is 1st started.

Please read at least until you see the asterisk separator. ie: 
************ so the INI file is properly setup!

REMEMBER TWO IMPORTANT ITEMS FOR ACCESSES:

1.   FILE EXTENSIONS ARE PREFERRED !!!!!

2.   You MUST go thru the TUTOR in ACCESSES.HLP

You probably can get by by reading CHANGES.TXT if you have Read
Tutor before.  You must read Tutor if you haven't before!

To Norton Desktop USERS:  READ NORTON.TXT and restore the minimized
Norton "child" Windows that can be restored to save their window
positions before starting Accesses.exe for the 1st time.  You can
update any windows anytime later if some of them are closed.

Check out the mouse click functions that Accesses has very early 
in your testing procedure! Read TUTOR in ACCESSES.HLP for more...

Follow these steps BEFORE LAUNCHING ACCESSES for the 1st time...

During the installation process you will automatically be storing 
currently opened window positions to your ACCESSES.INI file.  All
of this can be easily edited by Accesses later but it helps to
do some now.

1.   Make a backup copy of your WIN.INI file and SYSTEM.INI 
files NOW. I do nothing to your WIN.INI file; but hopefully you 
will be prefixing most of your [extensions] section of your 
WIN.INI file using an Accesses extensions update dialog box 
later. I will ask you if I can add taskman.exe=accesses.exe to 
your SYSTEM.INI file during the installation. (This change is not 
required but speeds the Ctrl+Esc key call to Accesses. If you are 
using a remote drive, adding the taskman.exe=accesses.exe line to 
your SYSTEM.INI file speeds things up considerably.)

2.   open one copy each of 5 or 6 of your most frequently 
used programs before running ACCESSES. Open Windows File Manager 
(or equivalent) and open the File Manager's 'About' Box (under the 
Help menu) and if your 'Free System Resources are greater than 
30% open more windows until this number is between 20 to 30%, but 
not less than 20%. eg. Open one each of Notepad, Write, Excel, 
Winword, Am, calculator,..., etc If you're running windows in 
the Enhanced Mode, open a DOS window as well and place the DOS 
window where you want it to be placed.

If you are Beta testing Windows 3.1, don't open more than 30
or 40 windows to avoid all of this taking too long.

3.   Close any duplicate programs. For example, Run only one 
'Notepad'. If you want to keep a duplicate program open, 
minimized the program whose position you do not want to store. 
(TUTOR will explain how to save both in a separate procedure 
after the installation.)

4.   Move these programs to the window positions that you 
want them to normally be in when in the 'Restored' (not maximized 
and not minimized) positions. USE THE RESTORED POSITION for all 
of these WINDOWS.

3.   Then launch ACCESSES for the 1st time.

READ TUTOR in Accesses.hlp. This takes 5 minutes...

Do add accesses to your WIN.INI extensions using Accesses'
Setup+Configure - Update WIN.INI extensions.

****************************************

What's next for Accesses...

I'm probably going to add an option to popup another window to
display current available drive space.  My current thoughts are
that this will be a separate tiny-tiny program that is driven by
Accesses.  This way I'll be using only one timer for both
programs...  One of the major objectives of Off the WALL Software
is to minimize usage of your system resources with Off-the-Wall
programs.

****************************************

Accesses does everything I could think of to help you access, 
run, and place your programs where you want them to be. Accesses 
can even do this from most other programs!!!! If you think of 
something that Accesses should access and don't know how to do 
it, call me. Accesses probably can do it now, if you knew how.

******************************************************

I wish you the best computering,

                                        Ted

PS, if you like Accesses, please register it.

I can be contacted at the following:

Address:        T. F. Wall
                Off the WALL Software
                7680 Cottonwood Ln.
                Pleasanton, CA 94588-4322         USA

Phone:          Charge Cards cannot yet be accepted.

Registered users can call for product support, improvements and 
others can make inquiries at the following:

                510-484-4129   8am - 6pm (Pacific Time)

Site License agreements can be negotiated.

I can be contacted on CompuServe; although, I currently access 
this system on a weekly basis.

                COMPUSERVE ID 73747,1563

The latest version of ACCESSES can be found on the: 

	CompuServ - WINADV board (slow to receive updates) 
	CompuServ - PCMAG UTILFORUM board (fast updates) 
	CompuServ - SYMFORUM NORUTL board (fast updates) 

and ARCHIVES is found on the: 

	CompuServ - WINADV board

Search CompuServe using WALL as a keyword.
