Soundscape Windows 95 Driver Read Me
8/3/95
Driver Version 4.00.26 (Build 26)


This document contains important information regarding the installation and use
of the Soundscape driver under the Windows 95 operating system.  It is
recommended that you print this document out and keep it for later reference.


*******************************************************************************
This is our first external BETA release of the Soundscape Windows 95 driver.
You use it at your own risk.  We currently are not offering phone tech support
on this drivers.  We will accept questions via e-mail.  To submit a question
or feedback, send e-mail to soundscape-bugs@ensoniq.com.  Please place in the
Subject line the words Windows 95.
*******************************************************************************

*Installation*

To install the Windows 95 driver:
1)Open up the Control Panel
2)Open up the Add New Hardware applet
3)On the first page of the Add New Hardware Wizard select Next
4)When prompted to auto detect hardware select No.
5)When asked the type of hardware you want to install select "Sound, video and
  game controllers". Then select Next.
6)When asked for the Manufacturer and Model of your hardware select "Have Disk"
7)When prompted for the installation disk, enter the full path name of the
  driver diskette (e.g., c:\sscape95\ or a:\).
8)When asked to select the installed device, select ENSONIQ Soundscape.
9)You will then be presented with the Hardware settings that Windows would like
  to configure the driver with.  These settings are based upon the hardware
  settings that the board is capable of along with the ones that are free in
  your system.  If either Inport/Outport Range does NOT match the current IO
  Address of the MIDI device or the Wave Device you will need to change the
  appropriate jumpers on your Soundscape card.

10)At this point, the driver should load.  If it can't load, you will be asked
   to power down your system.  Choose Yes and then verify the IO jumpers on the
   Soundscape card.


Also, if you have not already done so.  You should install the Windows 95
multimedia applications.  These include, a mixer, Media Player, Sound Recorder
and a CD Player.  Consult your Windows 95 manual for installation instructions.


**Driver Configuration**
To access the driver configuration page:
1)Right click on My Computer and select Properties
2)Select the Device Manager tab.
3)Double Click on Sound, video and game controller.  This will expand that tree
  branch, allowing you to see the ENSONIQ Soundscape driver.
4)Select the ENSONIQ Soundscape branch and click Properties.

Once inside the ENSONIQ Soundscape property page, you can modify the resource
allocations, and change hardware parameters.

**Outstanding Issues**
Sending large SysEx dumps to the driver will cause the driver to hang.

The DOS MT-32 mode command does not function.

Need more intuitive messages when the VxD fails.

The Audiostation included with the Windows 3.1 Soundscape software currently
does not support the Soundscape Windows 95 mixer interface.

DOS Compatible mode is not supported in this release.  This will be available
when the full build is available.  For now, DOS Compatible mode can load the
previous version of SSInit and the SNDSCAPE.COx files.

