U-Convert-It v1.20
Copyright  1995 by Fred Block
All Rights Reserved
===========================================================
	
    Table of Contents:
	1 - System Requirements
	2 - Installation
	3 - List Of Files
	4 - Documentation
	5 - Upgrade Instructions
	6 - Shareware Information
	7 - Message from the Author
	8 - Revision History Notes

-----------------------------------------------------------
1 - System Requirements
-----------------------------------------------------------
  1) Windows 3.1 or Windows for Workgroups
  2) 386 or higher processor
  3) Mouse or other pointing device (recommended)
  4) Color monitor - High SVGA resolution (recommended)
* 5) VBRUN300.DLL - Microcoft Run-time library file
* 6) THREED.VBX   - 3D Custom control 

* This program requires a copy of the files "VBRUN300.DLL"
and "THREED.VBX". They should reside in your path and can
usually be found in the C:\WINDOWS\SYSTEM directory. If you
do not have these files installed your computer, they  are
widely available and can be downloaded from almost any
bulletin board or from CompuServe.

----------------------------------------------------------- 
2 - Installation
-----------------------------------------------------------
If you received this version of U-Convert-It on a floppy
disk, insert the disk into a floppy drive. Then...
   1) Launch Windows if it's not already running.
   2) From the Windows Program Manager, select Run from the
      File Menu.
   3) Type 'A:SETUP' (no quotes) at the command line and 
      press [ENTER].
   4) Follow the instructions on the screen to enter the 
      directory in which to install U-Convert-It.
   5) Select the Continue button.
   6) A dialog box will appear informing you when 
      installation is complete.

If you received this version of U-Convert-It in a ZIP file,
extract the files to a blank floppy, then insert the
disk into a floppy drive. Follow instructions 1 through 6
shown above to complete the installation.

-----------------------------------------------------------
3 - List Of Files
-----------------------------------------------------------
The U-Convert-It v1.20 shareware package consists of the 
following files:
	
* UCONVERT.EXE  U-Convert-It program executable.
  UCONVERT.HLP	U-Convert-It help file in the Windows help
                file format. 
  README.TXT	Introductory and General information.
  ORDER.TXT	ASCII form for ordering / registering
  LICENSE.TXT   License agreement / warranty disclaimer.
  FILE_ID.DIZ   Description file for bulletin boards.
  UCONVERT.ZIP	Shareware Evaluation Version / U-Convert-It
		(Share this 'ZIP' file with others, please
		 read the text that follows! This file is
                 only included with registered version.)

  Various other files required for the SETUP program are 
  also included in the package but are not listed above.

*  Denotes files necessary for program function.

** Note: VBRUN300.DLL and THREED.VBX are also necessary
   files and are supplied with the registered version. **

Some files are distributed with an underscore character
at the end of the filename.  The underscore is replaced
with the appropriate character by the SETUP program.
As an example... UCONVERT.EX_ will become UCONVERT.EXE.

U-Convert-It is distributed as Shareware.  This means that
users are encouraged, subject to restrictions described in
the License Agreement, to share copies of this program with
friends, associates and bulletin boards. Included on the
installation disk is a copy of UCONVERT.ZIP for this
purpose. You may freely copy and distribute this file as
mentioned above. Alternately, if you downloaded this copy
of U-Convert-It from an online service such as CompuServe
or a bulletin board, that same file may also be freely
distributed as stated above.

If you did not receive all these files please contact
Fred Block via e-mail to 73410,3726 on CompuServe or 
by sending postal mail to Fred Block, P.O. Box 1533,
McAfee, New Jersey 07428.

-----------------------------------------------------------
4 - Documentation
-----------------------------------------------------------
For full documentation, including context sensitive help,
press the F1 key at any time while running U-Convert-It.

-----------------------------------------------------------
5 - Upgrade Instructions
-----------------------------------------------------------
Follow the installation instructions above.  You can install
this version of U-Convert-It to the same location as a 
previously installed copy of U-Convert-It. If you're already
a registered user, you will not need to re-register the
upgrade. U-Convert-It does it for you automatically! 

-----------------------------------------------------------
6 - Shareware Information
-----------------------------------------------------------
U-Convert-It is a "shareware program" and is provided at no
charge to the user for evaluation.  Feel free to share it 
with your friends, but please do not give it away altered 
or as part of another system.  The essence of
"user-supported" software is to provide personal computer 
users with quality software without high prices, and yet to
provide incentive for programmers to continue to develop 
new products. If you find this program useful and find that
you are using U-Convert-It and continue to use U-Convert-It
after a 30 day trial period, you must make a registration 
payment of $15 to Fred Block as described in the 
Copyright/License/Warranty Agreement file (LICENSE.TXT).
The $15 registration fee will license one copy for use on
any one computer at any one time. You must treat this
software just like a book. An example is that this software
may be used by any number of people and may be freely moved
from one computer location to another, so long as there is
no possibility of it being used at one location while it's
being used at another. Just as a book cannot be read by two
different persons at the same time. Commercial users of
U-Convert-It must register and pay for their copies of
U-Convert-It within 30 days of first use or their license
is withdrawn. Site-License arrangements may be made by
contacting Fred Block.
 
*** For ordering information see the ORDER.TXT file. ***

-----------------------------------------------------------
7 - Message from the Author...
-----------------------------------------------------------
Please write if you have any comments, suggestions, wishes,
questions or bugs to report. This information is both 
encouraged and greatly appreciated. Thanks!
 
===========================================================
   *** Thank you for your interest in U-Convert-It! *** 
===========================================================


-----------------------------------------------------------
8 - Revision History Notes
-----------------------------------------------------------
Ver.    Date    Description
----	-----	----------- 
1.00    08/95   Initial Release.

1.01	08/95	Fixed bug. User settings did not save if
		program was exited using the control box.

1.02	09/95	Fixed sq. meters to acres conversion. This
                conversion always resulted in a "0" result.
		(Thanks Manny!)

1.10	10/95	Added "From/To" swapping capability.

1.20	11/95	Added Angle and Velocity conversion types.
		Updated the 'save settings' features to save
		'all' of the users last settings for 'all'
		of the conversion types. Added instant
		access to the Microsoft Windows calculator.
		Both the built-in (U-Calculate-It) and
		Windows calculators are available from the
		Tools menu or hot-key combinations.

*** END of FILE ***