If you find any bug or problem with Trans64 please answer the following
questions and send the file to:
  schwall@athene.informatik.uni-bonn.de

Thank you for your help

      Bernhard Schwall

(The example configuration if mine)


about your PC:

processor (e.g. 486DX33):
turbo or slow mode (e.g. turbo):
bus-type  (e.g. ISA):
main memory (e.g. 8 MB):
number of parallel ports (e.g. 1):
operating system (e.g. Novell DOS 7.0):
free memory reported by "help|System info" (e.g. 382000):
Version of Trans64 (see "Help|About) (e.g. 1.16):
Where did you get the version from (e.g. author):


about the cbm drive(s):

cable (e.g. Disk64E):
number of floppies (e.g. 1):
floppy type (e.g. 1541):
fastloader installed in drive, if yes please specify (e.g. none):

devices also connected to the IEC-bus (even if they are switched of)
(e.g. none):
drive report of "help|System info" when the drive(s) are switched on
(e.g. Drive 8: 1541):


about the bug:

description:



when does it happen (e.g. always, sometimes, only on some files/disks, only
with fast routines):



appendix (e.g. a .D64 file you have a problem with):
