	RemoteRetrieve(tm) Version 1.0 - Remote file retrieval software                                     

	Copyright (c) 1993, 1994 by Outpost Software                          
	Personal Online Software & Telecommunications.

	642 San Miguel Avenue, Sunnyvale, CA  94086                                            */                    */
	Voice (408) 736-1070, Fax (408) 736-2263
	BBS (408) 736-1077 (requires RemoteRetrieve software)

    Inexpensive solution to remote file access
	
	RemoteRetrieve offers the inexpensive solution to retrieving
	files from your home or office computer, even when you're miles
	away.

    Features
	
	It eliminates the hassle of modem transfers with its preset
	modem configurations and preprogrammed high speed protocol.  The
	split window interface (showing local and remote directories and
	files side by side) makes transferring files effortless.  The
	split-screen file manager can also be used to move, copy, delete,
	and rename files on the local computer.

    Bonus features
	
	A unique file descriptor allows users to attach a description of
	up to 80 characters to each file in order to facilitate immediate
	file recognition.  The voice to data feature permits conversion
	from speaking on the phone to file transfer (or vice versa).
	Another convenient feature is the remote file viewer which allows
	previewing files before transferring them.

    Running under Windows
	
	RemoteRetrieve will run as a DOS application under Windows.  It
	can also be set to run in background, thus freeing up the Host
	computer for others to use.

    Registration
	
	If you use this program, please register it. See the accompanying
	order form ORDER.DOC.

	If you obtained this program from a shareware distributor, the
	money you paid for the program covered only the distributor's cost
	for sending you the program.  None of the money went to Outpost
	Software.  The only way we get reimbursed for our services is if
	you register the software.

    Requirements
	
	PC with 286 or higher
	640K Ram
	Hard Drive with 500KB free
	2400 baud or higher modem
	Mouse (recommended)

    Installation Instructions if RemoteRetrieve came on a Disk

	1. Put the floppy disk into either the A: or B: drive. At the DOS
	prompt (for example C:\> ) type A:\install or B:\install,
	depending on which drive the disk is in.
	
	2. The installation routine will ask for the drive letter of your
	hard disk where you want to install the program.

	3. You will then be asked if the installation program can update 
	your AUTOEXEC.BAT program.  The program defaults to YES. The 
	software will add the C:\REMRET directory to the path.  If you 
	want to indicate "NO", use your mouse to click on the NO button.  
	If you are using your keyboard, press the TAB key until the NO 
	button is highlighted and then press the ENTER key.

	NOTE: You will need to perform the installation and setup 
	procedures on both the remote and local computers.

	If there was an error in the installation, you can use the DOS
	'Copy' command to copy the file REMRET10.EXE to your hard disk
	and then type REMRET10.EXE.  REMRET10.EXE is a self-extracting
	compressed file.  After typing REMRET10.EXE you should see the
	files listed below.

	REMRET10.EXE was compressed using LHarc.

	LHarc is Copyrighted by Haruyasu Yoshizaki (Yoshi).

    Instructions for users who downloaded REMRET10.ZIP

	Use PKUNZIP to unzip REMRET10.ZIP.  After unzipping the files,
	you should see the files listed below.

	PKUNZIP is a trademark of PKWARE, Inc.

    File list

	The following files are copied over to your hard disk.

	README               4,675 01-07-94  12:00a
	REMRET   PIF           545 01-07-94  12:00a
	HOST     PIF           545 01-07-94  12:00a
	HOST     EXE        75,390 01-07-94  12:00a
	INSTALL  EXE        18,502 01-07-94  12:00a
	LICENSE  DOC         4,920 01-07-94  12:00a
	REMRET   HLP        42,708 01-07-94  12:00a
	ORDER    DOC         8,091 01-07-94  12:00a
	REMRET   EXE       308,352 01-07-94  12:00a
	REMRET10 DOC        53,481 01-07-94  12:00a

    Running RemoteRetrieve

	Type "REMRET" at the DOS prompt to run the RemoteRetrieve
	program.

	Type "HOST" at the DOS prompt to run the Host program, and
	set the computer to Host mode.  You must run the REMRET
	program first to configure the modem and set the password.
    
    Printing out the manuals and readme file

	Enter the following from the DOS prompt.  You must be in the
	C:\REMRET directory (or the directory where the files reside.)

	COPY *.DOC PRN
	COPY README PRN


