                      =========================
                      REBUILD.EXE 3.2.16 Update
                      =========================

ARTICLE-ID: Q111701

The information in this article applies to versions 3.2 and 3.2a of
Microsoft Mail for PC Networks.

The following files are included with this update:

   REBUILD.EXE (85,987 bytes, dated 02-21-95, 4:54 P.M.)
   README.TXT

 --------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY    |
| ACCOMPANY THIS DOCUMENT (collectively referred to as a Microsoft   |
| Software Library [MSL] file) IS PROVIDED "AS IS" WITHOUT WARRANTY  |
| OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT        |
| LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR        |
| FITNESS FOR A PARTICULAR PURPOSE. The user assumes the entire risk |
| as to the accuracy and the use of this MSL file. This MSL file     |
| may be copied and distributed subject to the following conditions: |
| 1) All text must be copied without modification and all pages must |
| be included; 2) If software is included, all files must be copied  |
| without modification; 3) All components of this MSL file must be   |
| distributed together; and 4) This MSL file may not be distributed  |
| for profit.                                                        |
|                                                                    |
| Copyright 1993-1995 Microsoft Corporation. All Rights Reserved.    |
| Microsoft is a registered trademark of Microsoft Corporation.      |
 --------------------------------------------------------------------

SUMMARY
=======

Microsoft provides a replacement for the Rebuild program file that is
included in versions 3.2 and 3.2a of Microsoft Mail for PC Networks.

For complete information, see the "To update your REBUILD.EXE file" 
section below.

MORE INFORMATION
================

This update contains the Rebuild Mail program file (REBUILD.EXE), a
replacement for the Rebuild program file that is included with 
versions 3.2 and 3.2a of Microsoft Mail for PC Networks. This update 
resolves the following problems:

 - This replacement file corrects a problem that occurs on MS-DOS 
   and Macintosh workstations when the GALNETPO.GLB file is 
   regenerated while REBUILD.EXE is running.

 - In certain conditions, Rebuild would complete its process 
   without failing or returning errors. However, the global address 
   list (GAL) would not contain all the expected names.

 - If a network error occurred during the Rebuild process and 
   Rebuild was unable to create or process a temporary file, an 
   error would not be reported.

To update your REBUILD.EXE file
-------------------------------

At the MS-DOS command prompt, type the following and 
press ENTER

   copy <drive>:\rebuild.exe <destination>

where <drive> is the drive and directory where you ran the 
self-extracting REBUPD.EXE file and <destination> is the drive 
and directory where your REBUILD.EXE file currently resides. 
For example, if you ran the self-extracting file from the 
TEST directory on drive D, and your REBUILD.EXE file is 
located in the MAILEXE directory on drive C, type the following 
command:

   copy d:\test\rebuild.exe c:\mailexe

NOTE: The REBUILD.EXE file typically resides on the postoffice 
server in the Mail executables directory as well as on 
the machine importing addresses into the database. Make sure you 
update all copies of REBUILD.EXE.