I used to have a DS-HST V32 with V42 Upgrade Roms but traded it in 
on the Newest DS-HST V32bis/v42bis with ASL/LAPM.

Here is my USR DS-HST V32bis/V42bis Roms dated: 3/05/91 NRAM  

ATI4
USRobotics Courier 14400 HST Dual Standard Settings...

   B0  C1  E1  F1  M1  Q0  V1  X7
   BAUD=19200  PARITY=N  WORDLEN=8
   DAIL=HUNT (TONE) ON HOOK TIMER

   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K3  &L0
   &M4  &N0  &P0  &R2  &S1  &T5  &X0  &Y1  %R0

   S00=000  S01=000  S02=255  S03=013  S04=010
   S05=008  S06=002  S07=060  S08=002  S09=006
   S10=010  S11=050  S12=050  S13=000  S14=000
   S15=008  S16=000  S17=000  S18=000  S19=005
   S20=000  S21=010  S22=017  S23=019  S24=150
   S25=000  S26=001  S27=128  S28=004  S29=020 
   S30=000  S31=000  S32=006  S33=000  S34=000
   S35=000  S36=000  S37=000  S38=000

S0=0 So that Modem does not Answer Phone when Mailer or BBS is Down.
S2=255 helps block Hackers who use (+++) etc.
S15=8  Help keep Hot-keys Hot with 9600+ baud rates
S19=5 Set Inactivity times to cut down on your Long distance bill
S27=192  if locked at 38400 S27=192, if locked at 19200 S27=128
S32= Voice/Data switch options S32=6 Resets Modem
&N0 Variable link rate. Modem negotiates the highest possible link with 
    remote modem.
&C1 Modem sends CD signal when it connects with another modem, drops CD
    on Disconnect.
&D2 Terminal must sent DTR for modem to accept commands. 
    when DTR is dropped, Modem Terminats the call.
Binkley's Answer |ATA| tells the modem to answer the phone.

ATI7
Configuration Profile...

Product type            External |
Options                 HST,V32  |
Clock Freq              16.0Mhz  |
Eprom                   64k      |
Ram                     32k      |
                                 |   *** New Update ROMS ***
Supervisor date         03/05/91 | Supervisor date      09/25/91
IOP date                10/11/90 | IOP date             10/11/90
DSP date                03/04/91 | DSP date             03/09/92
                                 |
Supervisor rev          3.0      | 
IOP rev                 1.3      | 
DSP rev                 10       | 

Here is my Switch settings:

Quad  1 2 3 4 5 6 7 8 9 0
 U    U U D U D U U D D U

Binkley Mailer INIT String:

INIT |ATZ|~~ATB0E0S0=0|
Port 2
Baud 19200
Autobaud
LockBaud /ARQ
Carrier 80
PreInit |v``^``
PreDial `
Init |ATZ|~~ATB0E0S0=1|
; TermInit |ATV1Q0X1E1| 
; Prefix |ATB1&K0&M4&N0DT
Prefix ATDT
Busy |ATM0H1|~v
Answer |ATA|
; ModemTrans 1 prefix/suffix      ; HST
; ModemTrans 2 prefix/suffix      ; PEP
; ModemTrans 3 prefix/suffix      ; HST or PEP
JanusBaud 32767
JanusOK /V32
JanusOK /ARQ/V32
JanusOK /ARQ/V32/LAPM
JanusOK /ARQ/V32/LAPM/V42BIS
JanusOK /ARQ/V32/MNP
JanusOK /ARQ/V32/MNP/MNP5

1. from B1 to B0 to look for V32 Connects First and HST connects Second.
this Allows Non-Standard/Off brand V32 modems to Connect at 9600+
HST's always recognize other HST's no matter what setting you have..
Binklel 
2. S0=1 tells the Modem to answer the phone.

Regards,
George Vandervort 
Lounge Lizard's Retreat 1:382/8 
BBS Phone: (512) 357-6904

