 OKIDATA OL400 Software Support

 -  Microsoft Windows 3.0 & 3.1 driver installation.

 The OL400 Windows driver files include an installation utility. 
 This program, "INSTALL.EXE" will expand the OL400 driver files 
 and copy them to your hard drive.

 The OL400 Windows driver requires 226K bytes of disk space.

 Before you begin this procedure:
     a) Know the hard drive and directory location of your Windows files.
        or example:  C:\WINDOWS
                
 PROCEDURE:
  1. From the DOS prompt, run the OKIDATA program INSTALL.EXE.
     The program INSTALL.EXE was created when you expanded
     the OKILINK driver file.

  2. The INSTALL program will initialize and display additional
     information.  Read the messages and press the Enter key to continue.

  3. If necessary, type the name of the directory that contains your
     Windows files.  The program INSTALL will verify your selection.
     If a WIN.COM file is not found you may be asked to enter a
     different location.

  4. The Windows driver files will be uncompressed and copied to your
     hard drive.  A message will indicate that the installation is
     complete.  Make a note of the location where the files were copied.

  5. After the files are uncompressed you will be given two options:

      a)  Press [Enter] to allow the program to continue and
          finish the installation.  The program INSTALL will
          update your WIN.INI file with new driver information
          and assign the driver to the default port, LPT1.
          The original WIN.INI file will be saved as WIN1.OKI.
          The program will return to the main menu where
          you may exit.
                              - or -
      b)  Exit the program by pressing [Esc] and complete the driver
          installation from within Windows.  Start Windows and use
          the CONTROL PANEL and PRINTERS to Add an Unlisted printer.
          The new driver files will be located in the Windows
          sub-directory "\SYSTEM". (For example, C:\WINDOWS\SYSTEM).


   The Microsoft Windows User's Guide contains additional information on
   using the Control Panel and Installing/Configuring printers.


 USING THE OL400 "B" AND "F" FONTS

 Your OL400 printer contains a number of fixed pitch fonts.  
 Some of these fonts are grouped as "B" and "F" cartridge fonts.

 Although the B and F fonts are built into your OL400, the term cartridge
 is used because these two groups were originally provided on separate
 font cartridges known as the B cartridge and the F cartridge.

 Note: Because the B and F internal font cartridges are similar in
 content, only one internal cartridge may be active.

 ACTIVATING THE "B" OR "F" FONTS
 Before using the B or F fonts they must be made active within your
 OL400 printer.
 1.  With the printer power on and display indicating ON-LINE,
     press the [ON-LINE] button once to place the printer OFF-LINE.
 2.  Press the [MENU] button until the display reads HP CARTRIDGE.
 3.  Press the [+] button to toggle through the following options:
                "B"     --- B cartridge active.
                "F"     --- F cartridge active.
               "NONE"   --- neither B nor F active.
 4. When the desired option is displayed, press the [ENTER] button.
    An asterisk ( * ) will appear indicating the selection will be active.

 5. Press the [ON-LINE] button.  The selected fonts are now active within
    your printer.   These fonts can now be used by software applications that
    support the "B" and "F" font cartridges.
     
 Using B and F with the OL400 Windows Driver
 When selecting an Internal Cartridge from the CARTRIDGES list in the
 Printer Setup,  there are several items which an operator must remember.

        1.  Whenever selecting an internal cartridge from the Cartridges List
            in the Windows OL400 Printer Driver,  the corresponding internal
            cartridge must be selected the OL400 front panel.  Failure to do
            this will result in text being printed in an incorrect font style.

        2.  Remember that only one of the OL400  internal B or F cartridges
            can be active at a single time.  Use caution when selecting the
            internal cartridges from the printer setup so that only one is
            selected at a time.

 TO PRINT A SAMPLE OF PRINTER FONTS:
 1.  With the printer power on, press the [ON-LINE] button once to place the                            
     printer OFF-LINE.

 2.  Press the PRINT FONTS button.  The printer's display will indicate:
     "PRINT FONTS." The printer will generate a font sample within 20 seconds.

  As indicated by the printed font sample, the B and F groups are made
  up of Swiss and Dutch fonts.  The Okidata font names "Swiss" and
  "Dutch" are equivalent to the fonts "Helvetica" and "Times Roman"
  found on the original B and F cartridges.

