README.TXT - How to install the Norton AntiVirus for NetWare 1.0 and 2.0
             Virus Definitions update.
AntiVirus Lab, SYMANTEC/Peter Norton Group
October 1, 1995
============================================================================
           Instructions for Loading New Virus Definitions Files

                Norton AntiVirus for NetWare 1.0 & 2.0
                Norton AntiVirus for Windows 95
                Norton AntiVirus 3.0 for Windows and DOS

============================================================================

Thank you for downloading the virus definition update for both Norton
AntiVirus for NetWare 1.0 and 2.0. This text file describes the contents
of the .ZIP file and installation procedure.

Important Note:  If your Norton AntiVirus for NetWare 1.0 is dated before 
July 13, 1994 you will need to update your version. Using an older version 
of the NLM with these virus definitions may cause false alarms with garbled
virus names. For information on how to receive the update, please call 
Customer Service at (800) 441-7234.

All contents of this file have been scanned by Norton AntiVirus 3.0 and
are free from virus infection. The virus definition and repair data
included with this update are for use by Norton AntiVirus 3.0 only. The
virus definitions and repair data will not work with any other software
or any earlier version of Norton AntiVirus. If you experience any trouble
with this update, please contact Norton AntiVirus Technical Support using
any of the methods listed in your user's manual.


============================================================================

This update contains the following files:

README.TXT     This text file contains instructions for installing the
               new virus definitions

OCT95.TXT      This text file describes what's new in this update.

VIRSCAN.DAT    This data file is used by Norton AntiVirus for NetWare
               1.0/2.0 to detect viruses and Norton AntiVirus 3.0 to
               detect and repair viruses. This file completely replaces
               the existing virus definitions in your Norton AntiVirus
               for Netware 1.0/2.0 or Norton AntiVirus 3.0 directory.

VIRSCANM.DAT   This data file is used by Norton AntiVirus for Netware
               1.0/2.0 to detect Macintosh viruses on network servers.
               This file is not used by Norton AntiVirus 3.0.

VIRSCAN.INF    This data file is used by Norton AntiVirus for NetWare
               1.0/2.0 and Norton AntiVirus 3.0 to display virus
               information, such as virus characteristics and behavior.
               This file is not required to detect or repair viruses. To
               view this information, use the Virus List command in the
               Tools menu.

VIRSPEC.TXT    Special instructions concerning specific viruses.


============================================================================

                          Loading New Definitions

NOTE:  The new definition files contained in this .ZIP file replace the
       corresponding Norton AntiVirus for NetWare 1.0/2.0 and Norton
       AntiVirus 3.0 files. Only the most recent virus definitions are
       required to fully update your copy of Norton AntiVirus.

============================================================================

To update Norton AntiVirus for NetWare 1.0/2.0 virus definitions:

     1.  Map a drive letter to the volume and directory where Norton
         AntiVirus for NetWare 1.0/2.0 is installed.

     2.  Disable Norton AntiVirus for NetWare, using either the Windows
         configuration component, or at the server console using the
         function keys.

     3.  Copy VIRSCAN.DAT, VIRSCANM.DAT and VIRSCAN.INF into the Norton
         AntiVirus for NetWare directory.

     4.  Enable Norton AntiVirus for NetWare, using either the Norton
         AntiVirus for NetWare Windows configuration component, or at
         the server console using the function keys.

TIP:  If you unzipped this file inside your \NAVNLM directory on the
      server, then step 1 is already completed. If you unzipped this file
      in a different directory, copy the extracted files to your \NAVNLM
      directory. If prompted to overwrite existing files, select Yes.


=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*                          IMPORTANT NOTICE - NAV 3.0                      *
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

      If your version of Norton AntiVirus 3.0 for Windows and DOS is dated
      before June 9, 1995, you will need to update it using the NAV July 1995
      Update in order to use these virus definitions. If you have not
      updated your version, download the NAV July 1995 Update from the
      Symantec BBS, CompuServe, or America Online. The file is called
      UPDATEME.EXE and is located where the monthly update files are
      normally found. Alternately, you may call Customer Service at (800)
      441-7234 to obtain the NAV July 1995 Update disk.

============================================================================

To update Norton AntiVirus for Windows 95 virus definitions:

1)  Double-click the "My Computer" icon on the desktop.
    The My Computer window opens displaying your available drives.

2)  Double-click the drive or director that contains the Norton AntiVirus 
    Definitions Update.

3)  Double-click the Nav30 folder.
    The list of definition update files is displayed.

4)  Copy the following files to your Norton AntiVirus for Windows 95
    folder. By default, this is the C:\Program Files\Norton AntiVirus
    folder:

         VIRSCAN.DAT
         VIRSCAN.INF

    For instructions on how to install the definition files from the DOS
    prompt, see the additional update instructions below.

5)  Launch Norton AntiVirus, then scan your drives.

    Each update contains detection for newly discovered viruses.
    Performing a virus scan will also force Norton AntiVirus to recognize
    that a new VIRSCAN.DAT file is in place.

6)  Restart your computer so that the Automatic Protection TSR uses the
    newest virus definitions.

==========================================================================

To update Norton AntiVirus 3.0 virus definitions:

     1.  Copy VIRSCAN.DAT, VIRSCAN.INF, and VIRSPEC.TXT into the Norton
         AntiVirus 3.0 directory.

     2.  Scan a drive, directory, or file with Norton AntiVirus 3.0, in
         either DOS or Windows.

         This will generate new interim files and update the automatic
         protection TSR.

     3.  Reboot your computer to load the updated automatic protection
         TSR.

TIP:  If you unzipped this file inside your \NAV directory, (\NDW for
      users of Norton Desktop for Windows), then step 1 is already
      completed. If you unzipped this file in a different directory, copy
      the extracted files to your \NAV directory. If prompted to overwrite
      existing files, select Yes.

============================================================================

Please read OCT95.TXT for a detailed list of the new virus definitions in
this update and important information about current worldwide virus
alerts.

We welcome your comments and suggestions. Please post them wherever you
download this file.

Thank you for using SYMANTEC/Peter Norton products.

==========================================================================
