IBM

PS/2 Server 85 9585 OKG/OKT/ONG/ONT

This document represents official notification of the IBM PS/2 Server 85 9585 OKG/OKT/ONG/ONT platform for VINES systems.

						
A.	Certification Statement

	Banyan Systems certifies the IBM PS/2 Server 85 9585 0KG/0KT/0NG/0NT is compatible 	with VINES 5.54 (0) Unlimited.


B.	Two ICA Test
 
	The two ICA test was run with 16MB of System Memory . Base memory cannot be lowered to  	512KB. To install two ICA cards with 16MB of memory, the user will install the ICA cards 	and run the Automatic Configuration program from the IBM reference diskette. Ensure a backup 	copy of the reference diskette is created before running the Automatic Configuration program. 	The ICA cards settings are then added in VINES Add Card Menu after running the reference 	diskette and then the server must be shutdown and rebooted to load the ICA card device drivers. 
   	
	Version 2.65 of the configuration utility (sc.exe) must be present on the reference utility diskette 	when installing ICA cards in the system. Run the reference utility and select display revision 	levels to determine the configuration utility version. Contact IBM support to obtain the correct 	version of the configuration utility if it is not present on the reference diskette or present in the 	system partition. 	  


C.	Hardware Configurations Certified

	Configuration A
	

Manufacturer
Model
Type     
Rev     
Bios Rev

Motherboard
IBM
F8B4
486DX/33
2
82G3542

Video Controller
IBM
None
SVGA
39G2469
None

Disk Controller
IBM
On-Board
SCSI
N/A
None

Disk 1
IBM
545MB 
SCSI
N/A
None

Tape Controller
IBM
On-Board
SCSI
N/A
None

Tape Drive 
Banyan
 5525ES ACA
525MB
A
73M






	Configuration B


Manufacturer
Model
Type     
Rev     
Bios Rev

Motherboard
IBM
F8B4
486DX2/66
2
82G3542

Video Controller
IBM
None
SVGA
39G2469
None

Disk Controller
IBM
On-Board
SCSI
N/A
None

Disk 1
IBM
545MB 
SCSI
N/A
None

Disk 2
IBM
1000MB
SCSI-2
N/A
None

Tape Controller
IBM
On-Board
SCSI
N/A
None

Tape Drive 
Banyan
 5525ES ACA
525MB
A
73M

						

D.	Hard Drive Setup
		  	    
	The Disk Drives were  factory formatted and ready to load VINES.   The drives can
	be formatted from the Advanced Diagnostics utilities provided by IBM.

E.	Cards & Settings
       

Card
DMA
IRQ
I/O
RAM
ROM
Test

3Com 3C523

3
300
C0000

Banyan

IBM PS/2 Ethernet/A

3
200
D8000
D4000
IBM

IBM TR 16/4 Adapter/A

2
A20
DC000
D2000
IBM

IBM Token Ring 16/4 A

2
A20
DC000
DA000
Banyan

ICA 

5
401
FC0000

Banyan

ICA 

10
421
FE0000

Banyan

ICA

5
401
F00000

IBM

ICA

12
421
F20000

IBM



System Setup 

The IBM server 85 is shipped with the reference and diagnostic files loaded into a 3MB hidden partition on the fixed disk that is the boot drive. The reference configuration menu can be accessed by hitting escape and F1 after powering on the system or after a warm boot. Prior to installing VINES, the startup configuration must be changed. This is done by booting the system partition (escape, F1) and selecting "set features" and "set startup sequence". Startup should be changed to, Startup number 1, device 2.88MB 3.5 inch diskette drive 0, startup number 2, SCSI Hard disk  (ID 6, LUN 0).                    





Setup  Configuration  

Total System Memory
	Installed Memory	16384KB (16 MB)
	Useable Memory 	16000KB (15.6MB)
Built in Features
	Installed Memory	16384KB (16MB)
	Diskette Drive 0 Type	2.88MB 3.5"  
	Diskette Drive 1 Type	Not Installed
	Diskette Drive 2 Type	Not Installed
	Math Coprocessor	Installed
	Serial Port	Disabled
	Parallel Port	PARALLEL 1 	
	Parallel Port DMA Arbitration Level	Disabled
	SCSI Address (ID)	7
	SCSI I/O Address select	3540h-3547h
	SCSI Fairness On/Off	On
	SCSI DMA Arbitration Level	Level C
	Move Mode Support	Enabled
	Wait State Support	Enabled
	Selected Feedback Return Exception	Ignored
	100ns Streaming Data Transfer Support	Enabled
	Target Mode	Enabled
	SCSI Disconnect	Enabled
	Fast SCSI - External	Disabled
	WIDE SCSI messages - External	Disabled
	WIDE SCSI messages - Internal	Disabled
	Processor	33Mhz 80486DX  (66Mhz 80486DX2) Config. B
	Bypass System Programs on Error	Disabled	
	Memory-Checking Method	ECC


Slot 1	Empty  


Slot 2	IBM Token-Ring Network 16/4 Adapter/A
	Primary or Alternate adapter	Primary
	Adapter Data Rate	16Mbps
	ROM Address Range	DA000-DBFFF
	RAM Size and Address Range	16KB / DC000-DFFFF
	Interrupt Level	2  



Slot 3	3Com EtherLink/MC Ethernet Adapter
		Enable/Disable Adapter	Adapter Enabled
		I/O Address Range	300 to 307
		Interrupt Level	Channel 3
		Packet Buffer RAM Address Range	C0000 to C5FFF
		Transceiver Type	On-Board Transceiver (BNC)

Slot   4	Empty
	
Slot  5	SVGA Adapter/A 
	Video I/O Address	Instance 6:2160h-216Fh

Slot  6	Empty
	
Slot  7	Banyan Systems ICA/mC  
 	Adapter Memory Address   Selection	Base Address: FC0000                       
	Adapter I/O Address Selection	Base Address: 000401
	Adapter Interrupt Level Selection	Level : 5

 Slot 8 	Banyan Systems ICA/mC  
 	Adapter Memory Address   Selection	Base Address: FE0000                       
	Adapter I/O Address Selection	Base Address: 000421
	Adapter Interrupt Level Selection	Level : 10


Setup of SCSI Device Configuration (Configurations A and B)

		SCSI Address (ID)	SCSI LUN
	IBM PS/2 System Board SCSI	7			0
	Disk1	6			0
	Disk 2	5			0
	Tape Drive	3			0
		

Additional Information

	The System was certified with 16MB of System Memory.

	The Base Memory cannot be lowered to 512KB. 

	The Processors certified are the 80486DX/33 and 80486DX2/66 manufactured by Intel.

	The System uses a Microchannel  type bus Architecture.

	The Tape Drive certified was a Banyan 525MB External Tape Drive.

 	IBM Reference Diskette Version: 1.32
	 
 
F.	Headquarters

	IBM
	Route 100
	P.O. Box 100
	Somers, NY  10589	
Page {PAGE|1}

Banyan Systems Certification Notice		Version 1.0
Platform:  IBM PS/2 Model 85		July  27, 1994

		

Banyan Systems Certification Notice		Version 1.0
Platform:  IBM PS/2 Model 85		July 27, 1994


